PS5 Charging Base Adapter Bracket Multifunctional Cooling Stand- White

1.This base is compatible with CFI-1000A, CFI-1000B PS5 host and the new PS5 CD/digital version host
2.The built-in two speed fans can speed up the air flow at the bottom of the PS5 host to achieve the purpose of heat dissipation.
3.The fan control switch on the left side can switch the fan for four gears (fast, medium, slow, OFF), using intelligent chip control, and has the power off recording function.
4.There are 11 disc slots on the left side of this product, which is convenient for users to place 11 boxes of games they like to play.
5.This product is equipped with Y-type data cable can be powered from the two USB 3.0 ports on the back of the PS5 host, can support USB2.0 data transmission, there is no need to purchase additional power.
6.This product can charge two PS5 original handle/elite handle at the same time. When charging, the orange breathing light can be seen from the front of the handle. After full charging, the orange breathing light of the handle will be turned off (Note: The orange breathing light will be displayed only when the handle is not connected to the host)
7.There is A type A USB 2.0 data transmission interface on the left side of the product, which is mainly used to connect the PS5 controller for games. At the same time, it also provides 5V DC power output, because this USB2.0 port is directly from the PS5 host, when the two PS5 controller charging ports on the charger are charging, it is not recommended to connect the high current charging load outside the USB2.0 port, otherwise the PS5 controller or external device cannot be charged normally. If there is no handle charging on the charger, the USB2.0 port can also charge the USB charging product (but this port may not be compatible with charging some digital products).
8.Handle full charge time: about 3-4 hours
9.Product length * width * height: 235*230*30MM, product material: ABS+ hardware base plate,
10. accessories: Y TYPE USB2.0 to Type-C data cable 1, Type-C adapter 4, 2 fixed screws. Compatible with the new PS5 optical/digital console with the expansion stand